Use this URL to cite or link to this record in EThOS:
Title: The application of halloysite nanotubes in epoxy resin nanocomposites
Author: Williams, R. J.
Awarding Body: University of Sheffield
Current Institution: University of Sheffield
Date of Award: 2019
Availability of Full Text:
Access from EThOS:
Access from Institution:
Halloysite nanotubes are a type of naturally occurring clay nanoparticle which have attracted increasing research interest as reinforcing fillers in polymer nanocomposites. This thesis investigates some fundamental, but often overlooked, considerations for their application in epoxy resin nanocomposites specifically, with a view to moving towards the eventual scale-up of the production of such materials. Firstly, some chemical and physical properties of halloysite nanotubes were characterised, and the results compared to supplier and literature data. Measured values were frequently found to differ from those that were expected. Significant attention is paid to the challenges associated with measuring nanotube size and shape, and it is concluded that neither light scattering nor electron microscopy can be used to reliably find these values. However, automated computational analysis of electron micrographs is highlighted as a promising avenue for further work. Several methods for dispersing halloysite nanotubes into epoxy resin were assessed in terms of the degree of dispersion of the nanotubes, whether any damage had occurred during mixing, and the mechanical properties of the final nanocomposites. It was concluded that the use of a three-roll mill in force mode was the most effective mixing method, as it produced nanocomposites containing individually dispersed nanotubes which had an increased flexural modulus compared to pure epoxy resin. It was also found that several methods could be used to measure the filler content in these samples, including helium pycnometry and burning off the resin in air. Finally, coating of the nanotubes with alkoxysilane coupling agents was shown to be successful, but it was also found to be variable in terms of the grafted amounts and the wettabilities of the coated samples. Nonetheless, scaling the process up to tens of grams produced coated samples with similar properties to those made on the scale of grams. Inaddition, piranha solution pre- treatment of the nanotubes was demonstrated to not to be an effective means of increasing the grafted amount of alkoxysilane on the surface, in contradiction to previous literature.
Supervisor: Fairclough, J. P. A. Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available