Use this URL to cite or link to this record in EThOS: https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.771443
Title: X-ray imaging of powder consolidation during laser additive manufacturing
Author: Leung, Chu Lun Alex
ISNI:       0000 0004 7658 3353
Awarding Body: University of Manchester
Current Institution: University of Manchester
Date of Award: 2018
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
The laser-matter interaction and powder consolidation in laser additive manufacturing (LAM) occur on very short time scales (10-6 - 10-3 s); and they have proven difficult to characterise. A better understanding of the underlying mechanisms during LAM is crucial for prediction and optimisation of part properties. This thesis highlights the development and applications of a LAM process replicator (LAMPR), combined with in operando high-speed synchrotron X-ray imaging and image analysis to study these mechanisms. Using this setup, the sequential powder consolidation phenomena were revealed in LAM of stainless steel (SS316L), a Fe-Ni alloy (Invar36) and bioactive glass (13-93). The consolidation mechanisms of alloy powders are driven by molten pool wetting and vapour-driven powder entrainment. The principal consolidation mechanism of 13-93 bioactive glass is driven by viscous flow. The evolution of porosity and spatter were revealed during LAM of virgin and oxidised Invar 36 powders under different build conditions. The oxide films altered the Marangoni convection from centrifugal to centripetal, restricted the melt flow (and gas transport) in the melt track and promoted pore growth. Several new pore mechanisms were uncovered, including pore migration, dissolution, dispersion, and bursting. The laser-induced gas/vapour jet promoted the formation of melt tracks and denuded zones while ejecting spatter at velocities up to 1 m/s along the argon gas flow and laser scanning directions. In addition, a new spatter mechanism has been discovered; spatter can be formed by laser-driven gas expansion. Laser re-melting of large pre-existing pores can result in two extreme outcomes: (1) pore healing by Marangoni flow and (2) formation of droplet spatter and open pore. These results have clarified the physics behind previous hypotheses and proposed new mechanisms in LAM, which are critical for the development of LAM and simulation models of the process.
Supervisor: Withers, Philip ; Lee, Peter Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.771443  DOI: Not available
Keywords: in situ ; Aerospace ; Bioactive glass ; Laser melting ; Synchrotron X-ray ; Laser powder bed fusion ; X-ray imaging ; Additive manufacturing ; Powder consolidation
Share: