Use this URL to cite or link to this record in EThOS:
Title: Design and additive manufacture of microphysiological perfusion systems for pharmaceutical screening of tissue engineered skeletal muscle
Author: Rimington, Rowan P.
ISNI:       0000 0004 7651 3726
Awarding Body: Loughborough University
Current Institution: Loughborough University
Date of Award: 2018
Availability of Full Text:
Access from EThOS:
Access from Institution:
The methodologies utilised by pharmaceutical companies for the toxicity screening of developmental drugs are currently based on outdated two-dimensional (2D) plate-based assay systems. Although such methods provide high-throughput analysis, limitations surrounding the biomimicry of the culture environment reduces the accuracy of testing, making the process cost and time inefficient. To significantly enhance the current methods, a screening platform that is both flexible in its design and is amenable toward physiologically representative engineered tissue is required. Incorporating a flow environment within the system elicits a variety of advantages over standard static cultures, pertinently the ability to couple the flow path with automated analytical systems via the use of intuitive software. Musculoskeletal pathological conditions account for £4.76 billion of NHS spending as of 2011 (Department of Health), affecting one in four of the UK adult population. Skeletal muscle, a highly metabolic and regenerative tissue, is involved in a wide variety of functional, genetic, metabolic and degenerative pathological conditions such as muscular dystrophy, diabetes, osteoarthritis, motor neuron disease and pertinently muscular weakness associated with aging populations. Skeletal muscle tissue engineering is centred on the in vitro creation of in vivo-like tissue within laboratory environments and seeks to aid the development of future therapies, by reliably elucidating the molecular mechanisms that regulate such conditions. However, the translation of such models toward systems amenable to pharmaceutical companies has to date been limited. Microphysiological perfusion bioreactors for in vitro cell culture are a rapidly developing research niche, although state of the art systems are currently limited due to the biologically non-representative 2D culture environment, lack of adaptability toward different experimental requirements and confinement to offline analytical methods. Advancements in additive manufacture (AM), commonly known as three-dimensional (3D) printing has provided a method of production that enables researchers to hold complete design freedom and facilitate customisation of required parts. The low cost, rapid prototyping nature of AM further lends itself toward the development of such technology, with design iterations quickly and easily printed, tested and re-designed where appropriate. Issues do however, currently persist regarding the biological compatibility of printed polymers and functional material properties of parts created. As such, this thesis investigated the use of AM as a rapid and functional prototyping technique to design and develop microphysiological perfusion bioreactors. Here, biocompatibility of candidate polymers derived from commercially available 3D printing processes; fused deposition modelling (FDM), stereolithography (SL), selective laser sintering (LS) and PolyJet modelling (PJM) were elucidated. Following the biological evaluation of these polymers, their suitability, and the applicability of each process in function and manufacture of perfusion bioreactors were assessed alongside the research and development process of system designs. Specifically, attention was afforded to the homeostatic environment within bio-perfusion systems. Once finalised, the biological optimisation of designs; biocompatibility and rates of proliferation in response to the perfusion environment, was undertaken. Protocols were then established for the automated perfusion of skeletal muscle cells in both monolayer and tissue engineered 3D hydrogels. This research outlined significant contributions to the scientific literature in 3D printed polymer biocompatibility, in addition to creating bio-perfusion systems that are adaptable, analytical and facilitate the in situ phenotypic development of physiologically representative skeletal muscle tissue. Polymer biocompatibility elucidated in this work will help to facilitate the wide-ranging use of AM in biological settings. However, advancements in the chemical properties of liquid resins for advanced photo-curable processes remain necessitated for AM to be considered as a primary manufacturing technique in the biological sciences. Furthermore, although systems developed in this work have provided a base technology from which to develop and build upon, significant challenges remain in the integration of tissue engineered perfusion devices within pharmaceutical settings. Although it is plausible that the technology created in its current guise would facilitate the automated generation of skeletal muscle tissue, systems require further development to aid their usability and scale. Furthermore, work is also required to optimise the biological environment prior to mass manufacture. As such, to truly influence the pharmaceutical industry, which has invested so heavily in more traditional screening technology, a system that is all-encompassing in biology, technology and automated analytics is required.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available
Keywords: Skeletal muscle ; 3D printing ; Perfusion ; Biocompatibility