Use this URL to cite or link to this record in EThOS:
Title: Stress analysis and aerodynamic optimization of small-scale compressed air turbines
Author: Daabo, Ahmed Mahmood Abdullah
ISNI:       0000 0004 7432 3283
Awarding Body: University of Birmingham
Current Institution: University of Birmingham
Date of Award: 2018
Availability of Full Text:
Access from EThOS:
Full text unavailable from EThOS. Thesis embargoed until 01 Jan 2023
Access from Institution:
This study aims to enhance the performance of the solar heater, consisting of parabolic dish concentrator and thermal receiver, as well as the expander, Small Scale Turbines SSTs. Using an advance ray tracing technique, OptisWorks software, both; a small scale parabolic dish concentrator and thermal cavity receiver were developed and optically enhanced. Simultaneously, small scale axial and radial turbines were developed using meanline approach and 3D CFD modelling using ANSYS CFX software. Then, the stator and the rotor of the SSRT were parametrized using two optimization techniques of multi-objective Genetic Algorithm optimization. To examine the SSRT mechanical design reliability, finite element analysis was utilised to determine the values and the locations of each; stresses, deflection and minimum allowed cycle number for the rotor. Consequently, to reduce the Von Mises stresses and deflections and increase the minimum number of cycles on both the rotor shaft and blades, multidisciplinary optimization was conducted to ensure better structural performance without influencing its aerodynamic performance. Comparing numerical and experimental, results showed that the maximum deviation in predicting the compressed air outlet temperature for the thermal receiver was less than 5%. Also, the deviation in SSRT efficiency and power output were about 16% and 14% respectively.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available
Keywords: TJ Mechanical engineering and machinery