Use this URL to cite or link to this record in EThOS: https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.751728
Title: The influence of 90° and 180° pipe bends on heat transfer from an internally flowing gas stream
Author: Staddon, Philip Wavell
Awarding Body: University of Surrey
Current Institution: University of Surrey
Date of Award: 1968
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
An investigation has been made into the effect of 90 and 180 bends, of 2 in internal diameter and varying diameter ratio, on the rate of heat transfer from a fluid flowing through the bend. The test section, immersed in water which acted as a heat sink, consisted of a pipe bend with upstream and downstream lengths of straight pipe. Hot air was blown through the test section and Reynolds numbers in the range 10,000 to 50,000 were studied. Local heat transfer coefficients were computed from a knowledge of local heat flux values along the pipe system. This enabled equations predicting heat transfer coefficients for a system containing a bend to be produced.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.751728  DOI: Not available
Share: