Use this URL to cite or link to this record in EThOS: https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.738598
Title: A travelling wave Zeeman decelerator for atoms and molecules
Author: Mcard, Lewis Alexander
ISNI:       0000 0004 7231 026X
Awarding Body: Durham University
Current Institution: Durham University
Date of Award: 2018
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
The design of a modular moving trap Zeeman decelerator capable of decelerating gas pulses produced from a supersonic source is presented here. Unlike the conventional form of Zeeman decelerator, paramagnetic particles are confined in a 3D potential throughout the deceleration process. The decelerator field is produced by flattened helical coils and currents of up to 1000 A peak. As the coils are periodic in nature, each coil produces a number of deep, quadrupole traps along the molecular beam axis. The resultant periodic field is described as a travelling wave. The application of the appropriate time dependent current allows the traps to move through the four coil modules. In order to compensate for the weaker transverse confinement, a quadrupole guide, operating at 700 A DC, is required to prevent further losses during the deceleration process. The operation of the decelerator relies on the power electronics developed specifically for the quadrupole and the decelerator coils. Due to the electromagnetic interference generated through the switching of the large currents, much of the electronics used to control the power electronics had to be developed specifically. The quadrupole power electronics have been designed to produce fast switching edges. This is necessary to minimise the interaction of the particles within the fringe field regions while maximising the interaction time within the pure quadrupole field. Even at a modest voltage applied to the circuitry, the rise time in current to 700 A has been reduced by a half. The decelerator power electronics must be capable of producing an alternating waveform with an amplitude of at least 500 A for each of the coil phases. Furthermore, the frequency of the waveforms must be tunable within a range of 10 kHz to 0 Hz. Through a combination of pulse width modulation and knowledge of the electrical properties of the coil it is possible to synthesise an alternating current waveform from a 800 V DC supply using a suitable switching circuit. %The challenge of switching such high powers is the transient voltage spikes that can be produced, however, these can be avoided through careful consideration of the layout of the circuit. Decelerators such as this do not cool the sample but instead reduces the mean velocity of a subset of particles which remained trapped. This maintains the phase space density of trapped particles. Modelling the magnetic fields generated by the decelerator coils has been necessary in order to understand the phase space acceptance of the decelerator. The helical nature of the coils required the development of a specific algorithm in order to calculate the field generated by each wire element. The resultant potential can then be interpolated using a tricubic interpolator to extract the field gradients necessary for numerical simulations of the particle trajectories. Including the effects of the pulse width modulated on the trap facilitates the characterisation of the acceptance of the decelerator and the limitations of the current iteration of the design. The numerical simulations can also be compared to experimental results gathered for metastable argon. The 3D guiding, or velocity bunching, of the gas packet over a range of velocities has been demonstrated. The ability to 3D guide and decelerate were severely hampered by the failure of key electronic components, limiting three coils to 100 A peak, moreover, these traps were sub-optimally loaded. Deceleration from 350 to 347 m/s and 342 to 310 m/s has been observed. The design of a trap capable of simultaneously loading samples of decelerated CaH and Li while allowing the cooling of Li would potentially allow for the sympathetic cooling of a molecular species with an atomic refrigerant. This particular atom-molecule system would also facilitate the examination of controlled chemistry and collisions over a range of temperatures through state selection of the reactants. The loading of the trap has been optimised in 1D for CaH with a loading efficiency of 52.2 % while only 7.3 % of Li is loaded when each of the gas packets has a mean velocity of 11 m/s. This implies that the source of the Li must be at least 130 times brighter than that of the CaH.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.738598  DOI: Not available
Share: