Use this URL to cite or link to this record in EThOS: https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.738380
Title: Optical magnetometry and micromagnetic simulations of three-dimensional magnetic nanostructures
Author: Hunt, Matthew
ISNI:       0000 0004 7229 2647
Awarding Body: Cardiff University
Current Institution: Cardiff University
Date of Award: 2017
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
This thesis describes the magnetic properties of three-dimensional (3D) magnetic nanostructures fabricated using two-photon lithography (TPL) and measured by the magneto-optical Kerr effect (MOKE), with supporting micromagnetic simulations. Simulations were performed on individual cylindrical nanowires composed of permalloy (Py) with diameter 50nm and length 1.5μm. Hysteresis loops were taken where the external field was applied at angles of 0o, 35.25o, 54.75o, 70.5o and 90o with respect to the wire axis. From investigating the visualisations of the magnetisation it was observed that Bloch point domain walls were propagated down the wire during the switching process. The resulting hysteresis loops were compared with those generated from simulations performed on tetrapod structures in the principle directions [100], [110] and [111]. It was found that the [100] and [110] loops were reproducible from the individual wire loops where the field angles matched. However, the [111] loop could not be reproduced due to domain wall propagation through the vertex. Angled 3D nanowires and 3D magnetic structures in tetrapod geometry made of cobalt (Co) were fabricated using two-photon lithography and electrodeposition. From SEM imaging, the nanowires in both structures were found to have an elliptical profile with feature sizes of 750±40nm lateral width, 910±30nm length perpendicular to the wire axis and approximately 8μm length for the individual nanowires, and feature sizes of 610±55nm lateral width, 900±75nm length perpendicular to the wire axis and approximately 6.5μm length for the nanowires comprising the tetrapods. MOKE measurements were performed on 300μmx300μm arrays of both, in the polar and longitudinal geometries. It was found that the polar MOKE loops were comparable between the two structures, whereas the longitudinal MOKE loops for tetrapods showcased unexpected transition events at higher fields and could not be reproduced from the measurements of the single wires.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.738380  DOI: Not available
Keywords: QC Physics
Share: