Use this URL to cite or link to this record in EThOS:
Title: The effect of asymmetrical street aspect ratios on urban wind flow and pedestrian thermal comfort conditions
Author: Setaih, Khalid
ISNI:       0000 0004 6352 4661
Awarding Body: Newcastle University
Current Institution: University of Newcastle upon Tyne
Date of Award: 2016
Availability of Full Text:
Access from EThOS:
Access from Institution:
Over the last six decades, due to the discovery of oil and improvement in economic conditions in Saudi Arabia, the design of urban traditional neighbourhoods has changed from organic and pedestrian-oriented to geometric and vehicle-oriented, which has greatly influenced the pedestrian use of outdoor spaces. Combined with the high ambient air temperatures, these current trends affect wind flow patterns and pedestrian thermal comfort conditions in the hot arid region of Madinah in Saudi Arabia. Numerous studies were conducted correlating the configuration of urban street geometries (presented by height to width H/W aspect ratios) with thermal comfort, but mostly conducted in relation to exposure to solar radiation. Most of the previous studies have focused on symmetrical aspect ratios rather than asymmetrical ones, thus limit the available knowledge on asymmetrical canyon studies, which are more representative of actual urban areas. The study of multiple asymmetrical urban street aspect ratios (i.e. diverse buildings height to street width), based on optimising the buildings’ height to influence wind flow rate, has not received much attention in the context of urban pedestrian thermal comfort, particularly in low wind speed environments within hot arid regions. The present study aims to evaluate the effects of multi-asymmetrical street aspect ratios on urban pedestrian microclimate and outdoor thermal comfort conditions, through a case study of Quba Road, to find ways to enhance the thermal comfort level compared to the existing urban configuration. The road is a commercial/residential route linking two prominent religious sites in Madinah. Computational Fluid Dynamics (CFD) ANSYS Fluent 13.0 software is used as a numerical modelling tool to simulate the urban pedestrian microclimates for comparative studies, and results validated by field measurements. The CFD analysis is used for evaluating the air temperature and wind velocity measurements within the windward and leeward canyons of Quba Road. Thermal comfort is expressed by means of the physiologically equivalent temperature (PET) index using RayMan software, with a comfort range of 21oC – 31.3oC. The findings indicate that the strategy of leeward gradual increase in multiple asymmetrical aspect ratios, with H/W of 1 – 1.3 – 2.3 (building heights of 12m-15m-27m and streets width of 12m), improves wind velocity magnitudes at the pedestrian level by 169% (from 0.65m/s to 1.75m/s) and reduces ambient air temperatures by 3.4oC, which is recommended for enhancing urban pedestrian microclimates in low wind speed environments. The research predicts that possible changes to the configuration of the urban fabric can decrease urban heat stress for pedestrians by 4.9oC (PET).
Supervisor: Not available Sponsor: Government of the Kingdom of Saudi Arabia
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available