Use this URL to cite or link to this record in EThOS:
Title: Nonlinear thermomechanical analysis of structures using OpenSees
Author: Jiang, Jian
ISNI:       0000 0004 2746 7110
Awarding Body: University of Edinburgh
Current Institution: University of Edinburgh
Date of Award: 2013
Availability of Full Text:
Access from EThOS:
Full text unavailable from EThOS. Please try the link below.
Access from Institution:
The behaviour of heated structures is strongly governed by thermal induced deformation and degradation of material properties. This thesis presents an augmentation of the software framework OpenSees to enable thermomechanical analysis of structures. The developments contributed to OpenSees are tested by series of benchmark cases and experimental results. OpenSees is an object-oriented, open source software framework developed at UC Berekeley for providing an advanced computational tool to simulate non-linear response of structural frames to earthquakes. OpenSees was chosen to be extended to enable the modelling of structures in fire. The development of this capability involved creating new thermal load classes to define the temperature distribution in structural members and modifying existing material classes to include temperature dependent properties according to Eurocodes. New functions were also added into the existing corotational beam/column element (2D and 3D) to apply temperature related loads. A new geometrically nonlinear shell element was created (based on the existing linear MITC4 shell element in OpenSees) using total Lagrangian formulation. Appropriate thermal load, material and section classes were also developed for enabling thermomechanical analysis using the nonlinear shell element. A number of benchmark tests were carried out to verify the performance of the new developments implemented in OpenSees. The benchmark tests involved subjecting beams and plates to a range of through depth temperature gradients with OpenSees results compared against closed form solutions. Further verification was also carried out by comparing OpenSees results with ABAQUS results. The extended OpenSees framework was also used to model experiments such as two plane steel frames at elevated temperatures, the Cardington Restrained Beam Test and the Cardington Corner Test and an earthquake damaged reinforced concrete (RC) frame subjected to a subsequent fire. The existing DruckerPrager material class in OpenSees was used to the model concrete in the composite floor in the Cardington tests and in the RC frame. The pinching material available in OpenSees was used to model the beams and columns in the RC frame to consider the cyclic degradation of strength and stiffness during the increasing cyclic displacements imposed on the RC frame before the fire. In all cases the results from OpenSees show good agreement with test data.
Supervisor: Usmani, Asif; Bisby, Luke Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available
Keywords: thermomechanical ; nonlinear ; OpenSees