Use this URL to cite or link to this record in EThOS:
Title: Combustion and emissions performance of oxygenated fuels in a modern spark ignition engine
Author: Daniel, Ritchie Lewis
ISNI:       0000 0004 2729 5750
Awarding Body: University of Birmingham
Current Institution: University of Birmingham
Date of Award: 2012
Availability of Full Text:
Access from EThOS:
Access from Institution:
The combustion and emissions performance of oxygenated fuels has been investigated in a modern direct-injection spark-ignition (DISI) engine. In particular, the new biofuel candidate, 2,5-dimethylfuran, otherwise known as DMF, has been assessed as a future automotive fuel against ethanol, the most commercially accepted spark-ignition (SI) biofuel. When operating with DMF, the engine performance and emissions are less sensitive to changes in key control parameters than with gasoline. This allows a wider window for improving performance and/or reducing emissions. The relevance of modern injection strategies to increase performance or efficiency has also been assessed when using DMF. The use of split-injection at full load is shown to be less beneficial than with gasoline. Novel fuel preparation techniques have been investigated by comparing externally supplied gasoline-biofuel blends (conventional method) to internally mixed, dual-injection blends. This new mode presents an avenue for optimising oxygenated fuels with a low heat of vaporization, such as DMF and n-butanol; low blends with gasoline (≤25% by volume) are more efficiently utilised than in external blends. Furthermore, the particulate matter (PM) emissions can be reduced with dual-injection because gasoline is supplied through PFI. The unlegislated emissions when using DMF have been benchmarked against gasoline and compared to other oxygenated fuels. In particular, the emissions of the major carbonyls are lower when using DMF compared to gasoline and even less so than ethanol, which heavily emits acetaldehyde and formaldehyde. The dual-injection mode further reduces the total carbonyl emissions when using DMF and ethanol blends compared to direct-injection (DI).
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available
Keywords: TP Chemical technology ; TS Manufactures