Use this URL to cite or link to this record in EThOS:
Title: Reversible solid oxide fuel cells as energy conversion and storage devices
Author: Gamble, Stephen R.
ISNI:       0000 0004 2721 2716
Awarding Body: University of St Andrews
Current Institution: University of St Andrews
Date of Award: 2011
Availability of Full Text:
Access from EThOS:
Access from Institution:
A reversible solid oxide fuel cell (RSOFC) system could buffer intermittent electrical generation, e.g. wind, wave power by storing electrical energy as hydrogen and heat. RSOFC were fabricated by thermoplastic extrusion of (La₀.₈Sr₀.₂)₀.₉₅MnO[subscript(3−δ)] (LSM) ceramic support tubes, which were microstructurally stable with 55% porosity at 1350°C. A composite oxygen electrode of LSM-YSZ was applied, providing a homogeneous substrate for a 20 μm - 30 μm thick YSZ electrolyte. A dip-coated 8YSZ slurry, and a painted commercial 3YSZ ink gave sintered densities of 90% and nearly 100% at 1350°C, respectively. A porous NiO/YSZ fuel electrode was also painted on. A Ag/Cu reactive air braze was unsuccessful at forming a void-free joint between the RSOFC and a 316 stainless steel gas delivery tube, as the braze did not penetrate the oxidation layer on the steel. Two alumina-based ceramic cements failed to fully seal the cell to an alumina gas delivery tube, due to thermal expansion coefficient mismatches and porosity after curing. Therefore, the maximum open circuit voltage (OCV) obtained during RSOFC testing was 0.8 V at 440°C. LSM-YSZ symmetrical cell performance measurements with oxygen pressure showed a diffusion polarisation, which was assigned to dissociative adsorption and surface diffusion of oxygen species. A collaborative RSOFC system software model showed ohmic and activation losses dominated the RSOFC, and diffusion losses were insignificant. Pressurisation from 1 to 70 bar increased the RSOFC Nernst voltage by 11% at 900°C, and reduced the entropy of the gases, reducing heat production and increasing electrical efficiency. A 500 kg Sn/Cu phase change heat store prevented the system overheating. Over a 16 h discharge-charge RSOFC cycle in the range 5 mol.% - 95 mol.% hydrogen in steam, at 20.4 A per cell or 3250 A m⁻², the electrical energy storage efficiency was 64.4%.
Supervisor: Irvine, John T. S. Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available
Keywords: Chemistry ; Solid oxide fuel cells ; Energy storage ; Extrusion ; Computer model ; Efficiency ; RSOFC ; SOFC ; Pressure ; TK2933.S65G2 ; Solid oxide fuel cells ; Energy conversion ; Energy storage