Use this URL to cite or link to this record in EThOS:
Title: Advanced high-power optical parametric oscillators synchronously pumped by ultrafast fibre-based sources
Author: Kienle, Florian
ISNI:       0000 0004 2715 7008
Awarding Body: University of Southampton
Current Institution: University of Southampton
Date of Award: 2012
Availability of Full Text:
Access from EThOS:
Access from Institution:
This thesis is concerned with investigating the generation of ultra short, tunable pulses at high average power and / or high pulse energy using synchronously pumped optical parametric oscillators (OPO) and appropriate power-scalable fibre-amplifier pump sources. Two types of pump sources with average powers up to ≈ 100W are considered: (1) a picosecond, allfiberised, high-power, variable-repetition-rate, Yb:fibre-amplified, gain-switched laser diode system and (2) a femtosecond, high-power, chirped-pulse amplification Yb:fibre laser system incorporating a pulse shaper module. Such OPO systems find applications in fields as diverse as materials processing and nonlinear microscopy / spectroscopy. Two OPOs based on periodically poled lithium niobate (PPLN) and pumped at 1060 nm from the first pump source are demonstrated. With 20 ps-long pump pulses, average powers of up to 7.3W (3.1W) for the signal (idler) are generated at variable repetition rates of ≈ 0.1 . . . 1GHz. With longer 100 ps pump pulses at a repetition rate of < 8MHz and an intracavity fibre as an OPO feedback component for compactness, combined pulse energies approaching 1 μJ are obtained, which are the highest reported to date. Tuning ranges from 1.4 μm to 1.7 μm (signal) and from 2.8 μm to 4.4 μm (idler) are typical for both OPOs. Including frequency-doubling of the 1060 nm light, the first pump source, operating at 230MHz and 20 ps, is used for two green-pumped OPOs tunable in the near-infrared range from 650 nm to 1040 nm(plus the idler from1.08 μmto 2.9 μm). The first OPO uses MgO-doped PPLN and up to 270mW of combined output power with 1W of pump power is obtained. Operation at higher power is complicated due to damage effects such as photo-refraction, nonlinear or induced absorption in lithium niobate. The second OPO uses lithium triborate (LBO) and compressed 4.4 ps green pump pulses to generate record average powers of up to 3.7W of signal and 1.8W of idler. Using the second pump source with a liquid crystal spatial light modulator pulse shaper, the demonstration of energy-scalable output pulses from 0.1 μJ to 2 μJ at a centre wavelength of 1045 nm with typical pulse durations between 300 fs and 600 fs is reported. Pump pulses with a duration of ≈ 600 fs at a repetition rate of 50MHz from this pump source are used for a PPLN OPO producing ≈ 1.9W (≈ 1.2W) of signal (idler) power at 1.5 μm (3.6 μm)
Supervisor: Shepherd, David Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available
Keywords: QC Physics