Use this URL to cite or link to this record in EThOS:
Title: Investigation into the interactions between thermal management, lubrication and control systems of a diesel engine
Author: Burke, Richard D.
ISNI:       0000 0004 2711 6265
Awarding Body: University of Bath
Current Institution: University of Bath
Date of Award: 2011
Availability of Full Text:
Access from EThOS:
Access from Institution:
Engine thermal and lubricant systems have only recently been a serious focus in engine design and in general remain under passive control. The introduction of active control has shown benefits in fuel consumption during the engine warm-up period, however there is a lack of rigorous calibration of these devices in conjunction with other engine systems. For these systems, benefits in fuel consumption (FC) are small and accurate measurement systems are required. Analysis of both FC and NOx emissions measurements processes was conducted and showed typical errors of 1% in FC from thermal expansion and 2% in NOx per g/kg change in absolute humidity. Correction factors were derived both empirically and from first principles to account for these disturbances. These improvements are applicable to the majority of experimental facilities and will be essential as future engine developments are expected to be achieved through small incremental steps. Using prototype hardware installed on a production 2.4L Diesel engine, methodologies for optimising the design, control and integration of these systems were demonstrated. Design of experiments (DoE) based approaches were used to model the engine behaviour under transient conditions. A subsequent optimisation procedure demonstrated a 3.2% reduction in FC during warm-up from 25°C under iso-NOx conditions. This complemented a 4% reduction from reduced oil pumping work using a variable displacement pump. A combination of classical DoE and transient testing allowed the dynamic behaviour of the engine to be captured empirically when prototype hardware is available. Furthermore, the enhancement of dynamic DoE approaches to include the thermal condition of the engine can produce models that, when combined with other available simulation packages, offer a tool for design optimisation when hardware is not available. These modelling approaches are applicable to a wide number of problems to evaluate design considerations at different stages of the engine development process. These allow the transient thermal behaviour of the engine to be captured, significantly enhancing conventional model based calibration approaches.
Supervisor: Hawley, John ; Brace, Christian Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available
Keywords: thermal management ; fuel consumption ; design of experiments ; dynamic calibration ; diesel engine