Use this URL to cite or link to this record in EThOS:
Title: Modelling the efficiency of an automated sensor-based sorter
Author: Udoudo, Ofonime
ISNI:       0000 0004 2693 5605
Awarding Body: University of Exeter
Current Institution: University of Exeter
Date of Award: 2010
Availability of Full Text:
Access from EThOS:
Access from Institution:
For future development of automated sensor-based sorting in the mining industry, an improvement in the separation efficiency of the equipment is desirable. This could be achieved through a better understanding of the identification and separation aspects of the automated sorter. For automated sorters that undertake separation through the use of compressed air jets, the problem of poor separation efficiency has been linked with co-deflection losses. Co-deflection losses occur as particles meant to pass on to the ‘accept’ bin are co-deflected with the particles (which are to be deflected) meant to go to the ‘reject’ bin. To study co-deflection losses and suggest means of improving automated sorter separation efficiency, this research investigates the effects of particle size, shape, throughput, together with the proportion of particles (out of the total test batch) required to be deflected on separation efficiency. The effect of the air valve configuration on separation efficiency was also studied. Presented also is a mathematical model which could be used to predict automated sorter separation efficiency. All separation efficiency investigations were undertaken using a TiTech Combisense© (BSM 063) automated sorter. Samples of granite were sized into -20+15mm, -15+10mm and -10+6mm size fractions and grouped into cubic and flaky shape fractions. These fractions were then divided into two with one portion painted for colour separation efficiency investigations. The separation efficiency results confirmed earlier research indicating that particle size and the fraction requiring deflection affects separation efficiency, with separation efficiency decreasing with a decrease in particle size and an increase in throughput. It was observed that co-deflection loss occurs when correctly identified ‘accept’ particles are co-deflected due to their close proximity to ‘reject’ particles that are to be deflected. Observations from the tests indicate that an increase in the proportion of particles requiring deflection increases the probability of finding ‘accept’ particles in close proximity to ‘reject’ particles leading to co-deflections. Monte Carlo simulations were used to produce a random distribution of particles on the conveyor belt as would be obtained from actual investigations. From these simulations particle proximity relationships and particle co-deflections were studied. Results indicate that the Monte Carlo simulations under-predicts particle proximity associations. The effect of shape on co-deflection was investigated with results indicating that flaky shaped particles produce higher number of co-deflections compared to cubic shaped particles. It was also observed that the valve sensitivity determined from valve opening and closing times is of importance to the selectivity (precision) of the separating air jets. A mathematical separation efficiency model is presented which contains two variables, the belt loading (calculated using particle size, shape and throughput) and the particle fraction of the total test batch that are to be deflected (% deflection). The separation efficiency can be calculated once these two variables are determined.
Supervisor: Pascoe, Richard ; Glass, Hylke Sponsor: AKUTECH
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available
Keywords: Automated Ore Sorting ; Modelling ; Sensor-based ; Separation ; Efficiency ; Mineral processing