Use this URL to cite or link to this record in EThOS:
Title: Hydraulic modelling and flood inundation mapping in a bedrock-confined anabranching network : the Mekong River in the Siphandone Wetlands, Laos
Author: Van, Tri Pham Dang
ISNI:       0000 0004 2695 4558
Awarding Body: University of Southampton
Current Institution: University of Southampton
Date of Award: 2010
Availability of Full Text:
Access from EThOS:
Access from Institution:
Anabranching fluvial networks recently have become the focus of attention from environmental specialists, especially in the hydraulic field. Anabranching networks can be found in different physical environments; however, the hydraulic and geomorphological natures of such river networks are still not well known leading to on-going discussions on the definition and nature of the networks. Even though, alluvial anabranching networks generally have common features like vegetated islands, low water surface slope and stable channel planform, bedrock-confined anabranching networks also have their own characteristics inherited from the geological and structural controls imposed on the single channels that compose the network complex. This thesis focuses on the provision of a benchmark describing the bulk hydraulic characteristics of a large bedrock-confined, anabranching river network, located within southern Laos. The network can be separated into: (i) the upper river network constituted by two bifurcations and one confluence with an interpolated bathymetry based on soundings of cross-sections along the navigation channels; and, (ii) the downstream river network characterised by a complex anabranching network with five bifurcations and five confluences for which there is no bathymetric survey. The river network as whole is a ‘composite’ – partly bedrock (especially the channel-bed) and partly alluvial-filled and as such it does not accord fully with any prior description or classification of anabranching channel networks (e.g. Huang and Nanson, 1996). To understand the hydraulic nature of the river network, the energy approach in a onedimensional (1D) steady-flow hydraulic model (HEC-RAS) was applied to the network. Significant challenges arose due to the lack of boundary conditions throughout the model, namely: (i) unknown splitting discharge ratios at each bifurcation; (ii) partly non-survey bathymetry; and, (iii) ungauged downstream boundary condition of one of the channel outlets. To determine the discharge entering each channel, the splitting discharge ratio at each bifurcation was defined originally by the ratio of the cross-sectional area of the first crosssection of each downstream channel and then adjusted based on the Flow Optimization function in HEC-RAS to minimize any rise or drop of the modelled water surface around a junction. For the channels with non-surveyed bathymetry, a SPOT satellite image was processed to construct a pseudo-bathymetry showing a range of elevations, including shallow and deep portions of channels, rather than detailed bed elevations as would be obtained from a measured bathymetry. To define the boundary condition of the ungauged channel outlet, the water surface elevation was interpolated and validated according to predefined assumptions (i.e. the water surface slope along the ungauged channel was interpolated according to the available DEM and cross-sectional width extracted from a SPOT image for low discharge conditions was assumed to be similar to the gauged channels for flooding discharges). In general, the study has helped to develop methods to model the complex river network with data constraints (i.e. the boundary conditions). The findings include: (i) the developed pseudo-bathymetry based on a SPOT image is useful to model a large river network using the energy approach in a 1D hydraulic model in which the cross-sectional area is important in modelling the bulk hydraulic parameters but the influence of the cross-sectional shape is subordinate; (ii) the in-channel hydraulic roughness coefficient at each cross-section may be significantly different from neighbouring values due to the variation in the local bedrock roughness and the roughness of intervening alluvial reaches; and, (iii) the hydraulic roughness of the riparian land cover along the floodplains does not contribute noticeably to the modelled stage along the river network nor to the planform extent of flooding for overbank flooding discharges. Rather, changes in land-cover, and hence the riparian roughness, are registered as small, but measureable, changes in the local velocity over the riparian floodplain and in the average in-channel velocity. Citations: Van, P.D.T., 2009. Hydraulic modelling and flood inundation mapping in a bedrockconfined anabranching network: The Mekong River in the Siphandone wetlands, Laos. Unpublished PhD thesis submitted to the Faculty of Engineering, Science and Mathematics, University of Southampton, England.
Supervisor: Carling, Paul ; Atkinson, Peter Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID:  DOI: Not available
Keywords: GE Environmental Sciences