Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.728637
Title: Metamaterial fabrication using combined multiphoton polymerization and optical trapping
Author: Askari, Meisam
ISNI:       0000 0004 6494 9098
Awarding Body: University of Nottingham
Current Institution: University of Nottingham
Date of Award: 2017
Availability of Full Text:
Access from EThOS:
Full text unavailable from EThOS. Restricted access.
Access from Institution:
Abstract:
Metamaterials are manmade structures with unique properties that cannot be found in nature. The metamaterial properties are structure dependent and enabled by the subwavelength periodic structure of the metamaterial. The goal of this thesis was to utilize an Additive Manufacturing (AM) technique to fabricate periodic metamaterial structures. Multi-Photon Polymerization (MPP) is a powerful AM method that has the capability to manufactures complex micro-scale 3D structures using ultra-short laser pulses. Typically, MPP has been used to manufacture micron-scale components in photopolymer materials. However, the development of sub-micron scale processes that can produce components from multiple materials within a single manufacturing step would be advantageous and open the potential to include different materials that can be manipulated and embedded within structures with sub-micron feature sizes. A combined MPP and Optical Trapping (OT) setup was proposed to achieve the capability of fabricating periodic sub-micron structures with multiple materials. Firstly, a modular MPP system was designed, assemble and tested. Secondly, a bespoke OT setup was assembled and tested with a variety of particles. Thirdly, the single material system was combined with an optical trapping (OT) setup to independently manipulate microparticles in the x, y and z planes. An afocal lens arrangement was employed to reduce the gap produced by aberrations in the system. The assembled combined MPP and OT setup has the capability to embed trapped particles in MPP fabricated structures regardless of the trapping and polymerization wavelength and produce repeatable results for different particles and polymers. The engineering innovation in the design of the combined MPP and OT setup increase the capabilities and available materials for this system. To test the capacity of the system particles were transported using OT, and then fixed to a well-ordered 3D matrix and encapsulated with polymer using MPP, thereby demonstrating the ability of the system as a microscale multimaterial fabrication techniques.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.728637  DOI: Not available
Keywords: TS Manufactures
Share: