Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.689588
Title: Simulation of solar powered absorption cooling system for buildings in Pakistan
Author: Asim, Muhammad
ISNI:       0000 0004 5919 6204
Awarding Body: University of Manchester
Current Institution: University of Manchester
Date of Award: 2016
Availability of Full Text:
Access through EThOS:
Access through Institution:
Abstract:
This research investigates the potential of a solar powered cooling system for single family houses in Pakistan. The system comprises water heating evacuated tube solar collectors, a hot water storage tank, and an absorption chiller. A literature review was carried out covering: • Energy situation, climate, and renewable energy potential in Pakistan; • Energy and thermal comfort in buildings, particularly for hot climates; • Solar collectors and solar cooling systems, particularly for hot climates; • Dynamic thermal simulation and weather data for solar energy systems and buildings. It was found that Pakistan is short of energy and that there is a great need to cool buildings. Renewable energy cooling systems are, therefore, of interest. The system described above was selected, as it was found that solar energy is abundant in Pakistan when cooling is required; thermal systems can be more economical than photovoltaics for hot climates and suitable components (collectors, absorption chillers, etc.) are commercially available. The TRNSYS dynamic thermal simulation program was selected as the main research tool, as it has been tested for solar energy and building applications by many researchers and suitable experimental facilities were not available. A simple typical building in Pakistan with a solar cooling system was simulated. Optimum values for key parameters were found by repeated simulations. It was concluded that the system would be able to provide cooling when required without an auxiliary heat source, and that an evacuated tube collector with a gross area of 12 m2, a collector flow rate of 165 kg/h, and a storage tank volume of 2 m3 would provide satisfactory performance for a 3.52 kW absorption chiller integrated with 42m3 single room. The results were in good agreement with published results from other researchers. Sensitivity analysis was carried out for the collector area, collector flow rate and storage tank size. It was found that varying the collector area had the largest effect on system performance, followed by varying the storage tank volume. Varying the collector flow rate had the smallest effect. It is recommended that solar cooling systems should be considered for Pakistan, and that further research should be carried out into reducing building cooling loads, using surplus heat for other loads, improving the performance of the proposed solar cooling system, and comparing it with other systems such as photovoltaics.
Supervisor: Dewsbury, Jonathan Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.689588  DOI: Not available
Keywords: TRNSYS Simulation ; Solar Cooling Pakistan ; Buildings Cooling Pakistan ; Building Energy Pakistan
Share: