Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.687498
Title: Nonlinear characterisation of reconfigurable antennas
Author: Mohd Shah, Shaharil
ISNI:       0000 0004 5924 0308
Awarding Body: University of Birmingham
Current Institution: University of Birmingham
Date of Award: 2016
Availability of Full Text:
Access through EThOS:
Full text unavailable from EThOS. Thesis embargoed until 25 May 2018
Access through Institution:
Abstract:
The lack of references on nonlinearity issue faced in reconfigurable antennas has motivated the work described in this thesis. The nonlinear behaviour is caused by active switches introduced on the radiating structure of the reconfigurable antennas. Depending on the type of active switches deployed on the antenna, the nonlinearity could be severe, which could have serious implications for antenna operation. Thus, the issue of nonlinearity in reconfigurable antennas should not be ignored and nonlinearity measurements should be performed to ensure the nonlinear performance is within an acceptable level. A set of nonlinearity measurements has been identified and performed on the proposed reconfigurable PIFAs. Prototypes are presented with PIN diode and E-PHEMT switches. For the purpose of comparison, measurements were also made with the active switch replaced with a copper bridge for linear interconnection. The nonlinearity performance can be evaluated from the measurement values of third-order intermodulation distortion (IMD3) products, ratio of IMD3 products to carrier, IMD3 products asymmetry, third-order input intercept point (IIP3) and 1-dB gain compression point (P\(_1\)\(_-\)\(_d\)\(_B\)). The measurements are performed when the antenna is transmitting signals. All measurements are performed on the state-of-the-art, 4-port ZVA67 Rohde & Schwarz VNA. Based on the nonlinearity measurements, it can be concluded that the presence of active switches has compromised the nonlinearity of the reconfigurable antennas. This is evident from the appearance of strong IMD3 products at the frequency of interest. In addition, the power-series-based approximation of 10 dB difference between the measured P\(_1\)\(_-\)\(_d\)\(_B\) and IIP3 is shown to be reasonable. Moreover, this work has demonstrated that the ratio of the IMD3 products to carrier does not vary significantly with radiation angles.
Supervisor: Not available Sponsor: Ministry of Education (MOE) ; Malaysia and Universiti Tun Hussein Onn Malaysia (UTHM)
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.687498  DOI: Not available
Keywords: TK Electrical engineering. Electronics Nuclear engineering
Share: