Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.682664
Title: Advanced packaging and integration solutions for enhanced performance power convertors
Author: Solomon, Adane Kassa
ISNI:       0000 0004 5924 4472
Awarding Body: University of Nottingham
Current Institution: University of Nottingham
Date of Award: 2015
Availability of Full Text:
Access from EThOS:
Full text unavailable from EThOS. Restricted access.
Access from Institution:
Abstract:
The design of novel solutions for packaging and integration of power semiconductor devices to deliver switches with advanced performance and reliability is very important aspect of power electronics technology evolution. The advancement of technology in this area is committed to bring significant improvements in the design and implementation of power converters particularly in the enhancement of efficiency, higher power density and better cooling system as compared to the state-of-the-art solutions. A power module is a combination of either multiple semiconductor or discrete devices which are connected to form an electrical circuit of certain structure. They are mainly constructed with a stack of four main parts (power semiconductor devices, insulating substrate with circuit conductor, baseplate, and interconnecting material encapsulated in a plastic case) and each of these parts is of a different material. Some of the interfaces within the module are prone to failure with thermal cycling such as wire-bond, solder die attach and substrate. Therefore reducing the number of interfaces in the assembly will greatly reduce the thermal resistance from the junction to ambient and yields noticeable increase of performance. Moreover, using solid posts as opposed to wires to connect the surface of vertical power components enable a significant improvement in power density as compared with standard modules based on wire bond technology. Additionally, the replacement of wires with such posts drastically reduces the distributed parasitic inductance, together with double-sided cooling of the devices, results in an increase of performance and reliability of the components and assemblies. In this work, 70um thick Infineon technology power devices which are rated at 600V/200A were used for the assembly of a Bi-directional switch based converter and discussing the challenges and trade-offs related to selecting processes and materials. Encapsulation is also one of the important factors in making of power module to protect the power chip and the interconnections from moisture, chemicals, dust, gases, and so on. Here, insulation process was carried out for a given prototype using silicone gel; however, it is worth to note the existing challenge on insulating a very small gap between the sandwich layers of the prototype as compared with the standard planar power module structure. A basic partial discharge test was also taken to demonstrate the performance of the insulation. This research has presented an advanced modular integration approach for power device packaging demonstrating the progress beyond the state of the art in power system assembly by proposing a solution which significantly improves electromagnetic and thermomechanical performance of the power module. In particular, fully bond wireless, double sided cooling and layout symmetry are key aspects. The proposed approach is transferable to many topologies having extra benefit of restricting the impact of single device or switch failure on the general system accessibility.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.682664  DOI: Not available
Keywords: TK7800 Electronics
Share: