Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.681211
Title: Multi-GNSS signals acquisition techniques for software defined receivers
Author: Albu-Rghaif, Ali
ISNI:       0000 0004 5919 3871
Awarding Body: University of Buckingham
Current Institution: University of Buckingham
Date of Award: 2015
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
Any commercially viable wireless solution onboard Smartphones should resolve the technical issues as well as preserving the limited resources available such as processing and battery. Therefore, integrating/combining the process of more than one function will free up much needed resources that can be then reused to enhance these functions further. This thesis details my innovative solutions that integrate multi-GNSS signals of specific civilian transmission from GPS, Galileo and GLONASS systems, and process them in a single RF front-end channel (detection and acquisition), ideal for GNSS software receiver onboard Smartphones. During the course of my PhD study, the focus of my work was on improving the reception and processing of localisation techniques based on signals from multi-satellite systems. I have published seven papers on new acquisition solutions for single and multi-GNSS signals based on the bandpass sampling and the compressive sensing techniques. These solutions, when applied onboard Smartphones, shall not only enhance the performance of the GNSS localisation solution but also reduce the implementation complexity (size and processing requirements) and thus save valuable processing time and battery energy. Firstly, my research has exploited the bandpass sampling technique, if being a good candidate for processing multi-signals at the same time. This portion of the work has produced three methods. The first method is designed to detect the GPS, Galileo and GLONASS-CDMA signals’ presence at an early stage before the acquisition process. This is to avoid wasting processing resources that are normally spent on chasing signals not present/non-existent. The second focuses on overcoming the ambiguity when acquiring Galileo-OS signal at a code phase resolution equal to 0.5 Chip or higher and this achieved by multiplying the received signal with the generated sub-carrier frequency. This new conversion saves doing a complete correlation chain processing when compared to conventionally used methods. The third method simplifies the joining implementation of the Galileo-OS data-pilot signal acquisition by constructing an orthogonal signal so as to acquire them in a single correlation chain, yet offering the same performance as using two correlation chains. Secondly, the compressive sensing technique is used to acquire multi-GNSS signals to achieve computation complexity reduction over correlator based methods, like Matched Filter, while still maintaining acquisition integrity. As a result of this research work, four implementation methods were produced to handle single or multi-GNSS signals. The first of these methods is designed to change dynamically the number and the size of the required channels/correlators according to the received GPS signal-power during the acquisition process. This adaptive solution offers better fix capability when the GPS receiver is located in a harsh signal environment, or it will save valuable processing/decoding time when the receiver is outdoors. The second method enhances the sensing process of the compressive sensing framework by using a deterministic orthogonal waveform such as the Hadamard matrix, which enabled us to sample the signal at the information band and reconstruct it without information loss. This experience in compressive sensing led the research to manage more reduction in terms of computational complexity and memory requirements in the third method that decomposes the dictionary matrix (representing a bank of correlators), saving more than 80% in signal acquisition process without loss of the integration between the code and frequency, irrespective of the signal strength. The decomposition is realised by removing the generated Doppler shifts from the dictionary matrix, while keeping the carrier frequency fixed for all these generated shifted satellites codes. This novelty of the decomposed dictionary implementation enabled other GNSS signals to be combined with the GPS signal without large overhead if the two, or more, signals are folded or down-converted to the same intermediate frequency. The fourth method is, therefore, implemented for the first time, a novel compressive sensing software receiver that acquires both GPS and Galileo signals simultaneously. The performance of this method is as good as that of a Matched Filter implementation performance. However, this implementation achieves a saving of 50% in processing time and produces a fine frequency for the Doppler shift at resolution within 10Hz. Our experimental results, based on actual RF captured signals and other simulation environments, have proven that all above seven implementation methods produced by this thesis retain much valuable battery energy and processing resources onboard Smartphones.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.681211  DOI: Not available
Keywords: QA75 Electronic computers. Computer science
Share: