Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637624
Title: The effect of injection mould surface finish on the ejection of plastics product
Author: Mohd, Alias Bin
ISNI:       0000 0004 5360 9717
Awarding Body: Edinburgh Napier University
Current Institution: Edinburgh Napier University
Date of Award: 2014
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
The development and fabrication injection of moulding tools is complex and demands highly skilled personal. The research aim is to study the effect of surface roughness on mould filling and the ejection of parts for amorphous and semicrystalline polymers. This study is to simulate and analyse polymers used and investigates the ejection force needed for different selected polymer resins for a series of cavity and core inserts with different surface roughnesses. Mould filling and comparison studies for polymers used also were carried out. Three common thermoplastics polymers were used for the cylindrical part: two amorphous thermoplastics: high impact polystyrene and an acrylonitrile butadiene styrene and a semi-crystalline polyamide. These three thermoplastics were selected due to these polymers are engineering materials being widely used in automotive parts, in the casing of household products and in gears. Apart from that there are different processing conditions for an amorphous and crystalline thermoplastic in terms of melting temperature, injection pressure, packing pressure and cooling times which are considered in this study. A two-cavity prototype tool for cylindrically shaped components was fabricated with variations in wall thickness by using a series of core inserts each with a different surface roughness. The part was constructed using CAD software and simulated in Autodesk Moldflow Insight 2010-R2 (AMI 2010-R2) in order to carry out the simulation works to obtain the required processing parameters for the injection moulding process. The application of simulation software packages for mould design and injection moulding process are vital in order to optimise the part quality and satisfy the market needs. For amorphous thermoplastics there is no melting point in terms of physical properties and having a high toughness due to butadiene chain present, in this case both for high impact polystyrene and an acrylonitrile butadiene styrene. Since polyamide has a viscosity lower than these two amorphous thermoplastics, the processing conditions and pressure will be different which can be identified through the melt flow rate of the resin. Polyamide also has a higher density which is 1.14 g/cm3 compared with high impact polystyrene and an acrylonitrile butadiene styrene which were 1.04 g/cm3 and 1.04 g/cm3 respectively. The study concludes that polyamide resin requires a shorter cavity filling time and less pressure compared with an acrylonitrile butadiene styrene resin. Polyamide also requires high ejection forces due to surface texture generated as compared with high impact polystyrene and an acrylonitrile butadiene styrene. The mathematical model results for the ejection force closely agree with the experimental data for the three materials used.
Supervisor: Hindle, Colin Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.637624  DOI: Not available
Keywords: TP Chemical technology
Share: