Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.633467
Title: Design and manufacture of a universal mechanical human joint simulator
Author: Al-Haifi, Nawaf
Awarding Body: Brunel University
Current Institution: Brunel University
Date of Award: 2011
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
The work performed in this thesis involves the study of human hip joint kinematics and load analysis. Such analyses are very useful for investigating mobility and natural functionality as well as the variation in motion due to replacement implants. The objective of this study is to design, build and testing of a universal human joint simulator that is configurable to hold several human joints and easily programmable to create the required motion. This was performed by creating a Stewart Platform, which is capable of moving in all six degrees of freedom; the maximum number needed by any human joint. Many specific human joint simulators are available on the market for simulating all major human limbs. These are used for wear testing replacement joints by using high load repetitive motion. These systems have a predetermined limit degree of movement and are very expensive; if one wanted to emulate another joint, one would have to purchase a whole new system. This novel system compromises of a three-phase power supply, Control Area Network with six actuators and drivers, a force reading clamp with strain gauges and data logger. A user friendly computer program was developed that is able to derive joint movement data from two inputs and replicating the movement by driving the platform, as well as recording force and displacement data from the joint. The product would be marketed towards biomechanical researchers and implant designers. Verification of this system was performed by simulating the human hip joint. A known combination of kinematic and force data were inputted into the system for nine different types of activities. The resultant force and joint centre displacement was then compared to see how well the system perform in comparison to the inputted data from a previous study. The outcome of this project is a fully functional machine and configurable program that can create movement data at varying speeds and body weights; which is also able to drive the human joint simulator. The design also costs a fraction of any industrial joint simulator. It is hoped that the simulator will allow easier study of both the kinematics and load analysis within the human joints, with the intent on aiding investigation into mobility and functionality; as well as variation in motion caused by a replacement implant.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.633467  DOI: Not available
Keywords: Hip kinematics ; Hip kinatics ; Gait cycle analysis ; Stewart platform ; Walking motion
Share: