Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.632331
Title: Metal oxide surfaces : beyond UHV
Author: Ahmed, Mahmoud Hashim Mohammed
Awarding Body: University of Manchester
Current Institution: University of Manchester
Date of Award: 2014
Availability of Full Text:
Access through EThOS:
Access through Institution:
Abstract:
In this thesis, three experimental studies of metal oxide surfaces beyond UHV conditions are presented, in an attempt to bridge the so-called ‘pressure’ gap. In the first of these studies, surface X-ray diffraction has been employed to elucidate the surface structure of #-Cr2O3(0001) as a function of water partial pressure at room temperature. In ultra high vacuum, subsequent to exposure to ~ 2000 Langmuir of H2O, the surface is determined to be terminated by a partially occupied double layer of chromium atoms. No evidence of adsorbed OH/H2O is found under this regime. At a water partial pressure of ~ 30 mbar, a surface termination involving a single OH/H2O species bound atop to each surface Cr atom is obtained. Surface X-ray diffraction has also been employed to elucidate the geometry of the TiO2(011)/H2O interface at room temperature. In ultra high vacuum, a surface structure in quantitative agreement with previously published studies is found. Most notably at a water partial pressure of ~ 30 mbar, the interface geometry is determined to be consistent with the predicted structure emerging from ab initio calculations in which the surface undergoes transformation from a (2×1) reconstruction to a (1×1) unit cell. In the final investigation a procedure for non-UHV wet-chemical preparation of TiO2 single crystal substrates is detailed. The potential of this recipe is demonstrated through application to rutile-TiO2(110) and rutile-TiO2(011) substrates. Characterisation with scanning probe microscopy, low energy electron diffraction and auger electron spectroscopy, indicate that flat, well-ordered, carbon-free surfaces can be generated. Notably, in contrast to the (2×1) surface unit cell found for TiO2(011) prepared in ultra high vacuum, wet-chemical preparation results in a (4×1) termination; wet-chemically prepared TiO2(110) displays an unreconstructed (1x1) surface.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.632331  DOI: Not available
Share: