Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.628590
Title: Thermomechanical processing of 34CrNiMo6 steel for large scale forging
Author: Ali, Nasar A.
ISNI:       0000 0004 5346 4140
Awarding Body: University of Sheffield
Current Institution: University of Sheffield
Date of Award: 2014
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
This work simulated the thermo-mechanical processing of large-scale forging product made of 34CrNiMo6 steel to evaluate the effect of different processing condition parameters and cooling rates on the variation of microstructure and the final mechanical properties. Through this investigation we tried to achieve the required mechanical properties for deep sea applications, which were a minimum Charpy impact value of 38J at temperature of -20 °C according to ABS specifications and a minimum surface hardness of 302 HB according to First Subsea specification design. Initially, a series of single and multi-hit plane strain compression tests were performed to evaluate the hot-deformed microstructure in thermo-mechanical processing, with particular attention paid to the effect of austenitising temperature and deformation conditions of temperature, strain and strain rate. The exponential law, power law and hyperbolic sine law types of Zener–Hollomon equations were utilised to calculate the hot activation energy of deformation (Qdef). In addition the constitutive equations were used for modelling and generalising the DRV and DRX flow curves of 34CrNiMo6 steel, using the method proposed by Avrami. Secondly, a heat treatment process using different austenitising temperatures and different cooling rates was also investigated to achieve the required aims, in which many tests were performed through controlling the temperatures, soaking times, and cooling rates to study the effect of the heat treatment parameters on the grain size and transformation behaviour of austenite. Additionally, to attempt to refine the austenite grain size and to increase the austenite phase percentage within the microstructure, multiple heat treatment paths were also used. A double normalizing, double quenching, and single tempered process were used in all possible combinations to investigate their influence on the final microstructure in an attempt to identify the most effective heat treatment cycle with an effective sequence for the heat treatment operations.
Supervisor: Wynne, Bradley Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.628590  DOI: Not available
Share: