Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.578612
Title: Quenching and partitioning : a new steel heat treatment concept
Author: Bigg, Timothy David
Awarding Body: University of Leeds
Current Institution: University of Leeds
Date of Award: 2011
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
Steel continues to be one of the primary materials in use today, however, even after 200 years of published research, innovative methods are being discovered and exploited to produce steel with enhanced properties. One such recent discovery has been termed Quenching and Partitioning (Q&P). The Q&P heat treatment process is reported to produce a multiphase microstructure consisting of retained austenite stabilised to room temperature, and a harder martensitic phase. This combination is prospected to form a new generation of high strength, formable sheet steel well suited to the demands of the automotive industry. Previous research has reported on the application of Q&P to commercial grades of steel, however, the temperatures required have hampered study of the process. In this investigation a model alloy has enabled separation of Q&P into its individual stages for closer inspection. Standard metallographic techniques were used to examine the microstructure of the material, followed by X-ray diffraction measurements to determine the stability of the austenite phase fraction before and after partitioning, confirming the effectiveness of the partitioning process in stabilising retained austenite. Estimations of carbon concentration via lattice parameter measurements have provided evidence of austenite carbon enrichment, but also suggest that some carbon remains unaccounted for, possibly as an equilibrium distribution between epsilon carbides and strained interstitial sites. In-situ partititioning in a neutron diffractometer has been utilised to obtain real-time measurements of the partitioning process. These measurements suggest that redistribution of carbon within martensite occurs before partitioning to austenite becomes kinetically significant. The trapping of carbon within energetically favourable locations is postulated to be a major factor in retarding carbon migration from martensite to austenite when compared to mathematical models of the partitioning process. Neutron diffraction measurements of carbon interstitial occupancy in austenite have also provided further evidence of austenite carbon enrichment during the partitioning process.
Supervisor: Edmonds, D. Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.578612  DOI: Not available
Share: