Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.571718
Title: Monolithic dual-wavelength InP/AlGaInP quantum dot lasers
Author: Shutts, Samuel
Awarding Body: Cardiff University
Current Institution: Cardiff University
Date of Award: 2012
Availability of Full Text:
Access through EThOS:
Access through Institution:
Abstract:
This thesis describes the development of a monolithic dual-wavelength laser based on an InP/AlGaInP quantum dot (QD) laser structure. Each wavelength is sourced from the same active region and can be operated simultaneously or independently, with light being emitted from a common aperture. The inhomogeneity of the QD material provides a wide distribution of energies, resulting in a broad and relatively flat-topped gain spectrum, which is ideal for sourcing multiple wavelengths. Measurements of optical absorption, gain and laser threshold current densities were used to characterise the optical properties of InP/AlGaInP QDs and ascertain a suitable structure from which to fabricate the dual-wavelength source. A growth temperature of 710 °C resulted in the lowest threshold current densities, and the incorporation of tensile strain into the upper confining layers was found to reduce the temperature dependence. Optical gain measurements were used to assess how state-filling and temperature govern the gain-peak wavelength. For a fixed gain at low injection the wavelength dependence follows that of the band gap (≈ 0.17 nm/K), but at higher levels of injection it becomes relatively temperature-insensitive. A minima in wavelength sensitivity corresponded to a net gain of ≈ 28 cm-1. Edge-emitting lasers with a wavelength temperature dependence as low as 0.03 nm/K were demonstrated for temperatures up to 107 °C (380 K). An Ar-Cl2 based inductively-coupled plasma (ICP) etch process, suitable for fabricating sub-micron features, was developed to create the necessary device architecture. Using the effects of state-filling and spectrally preferential feedback, coupled-cavity ridgewaveguide lasers with unequal length sections were used to generate two wavelengths, with separations up to 61.5 ± 0.2 nm. Time resolved spectra were used to demonstrate dual-mode operation, where both wavelengths were observed to emit simultaneously. This is a promising result as it suggests that this device could potentially be used as a compact terahertz source
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.571718  DOI: Not available
Keywords: QC Physics
Share: