Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.558871
Title: Active control of pressure pulsation in a switched inertance hydraulic system
Author: Pan, Min
Awarding Body: University of Bath
Current Institution: University of Bath
Date of Award: 2012
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
The nature of digital hydraulic systems may cause pressure pulsation problems. For example, switched inertance hydraulic systems (SIHS), which are applied to adjust or control flow and pressure by a means that does not rely on dissipation of power, have noise problems due to the pulsed nature of the flow. An effective method to reduce the pulsation is important to improve system performance and increase efficiency. Although passive systems to reduce the noise have been shown to be effective in many situations, their attenuation frequency range is limited and they may be bulky. Furthermore, attenuation devices based on expansion chambers, accumulators or hoses are likely to be unsuitable for SIHS as they add compliance to the system and would impair the dynamic response. This thesis is concerned with issues relating to the development of an active noise canceller for attenuating the pressure pulsation which is caused primarily by pulsed flow from high-speed valves in SIHS. Active control methods are widely and successfully applied in the area of structureborne noise (SBN) and air-borne noise (ABN) cancellation. The idea is using the intentional superposition of waves to create a destructive interference pattern such that a reduction of the unwanted noise occurs. However, applications for fluid-borne noise (FBN) attenuation based on the ‘Active noise control (ANC) principle’ are rare due to the restriction of the hardware and experimental apparatus in previous researches. In this thesis, an adaptive controller has been developed for active control of pressure pulsation in hydraulic system. The principle of the adaptive LMS filter and details of the controller design are described and the implementation was carried out through simulation. The designed controller was applied on a vibration test rig initially prior to the hydraulic testing in order to investigate its advantages and limitations in practice. Extensive testing on a switched inertance hydraulic rig proved that the controller, which used a piezoelectric valve with fast response and good bandwidth, is effective and that it has several advantages over previous methods, being effective for low frequency cancellation, with a quick response, and is robust and versatile. A novel method for the accurate measurement of unsteady flowrate in a pipe was proposed. This was applied and validated on a pipe, and was shown to give good results. This method solves the difficulty for measuring the unsteady flowrate currently by using easy-measured signals, such as pressures. It can be used widely for predicting the unsteady flowrate along the pipe.
Supervisor: Not available Sponsor: Engineering and Physical Sciences Research Council
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.558871  DOI: Not available
Share: