Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.553489
Title: Simulating avian wingbeats and wakes
Author: Parslew, Ben
Awarding Body: University of Manchester
Current Institution: University of Manchester
Date of Award: 2012
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
Analytical models of avian flight have previously been used to predict mechanical and metabolic power consumption during cruise. These models are limited, in that they neglect details of wing kinematics, and model power by assuming a fixed or rotary wing (actuator disk) weight support mechanism. Theoretical methods that incorporate wing kinematics potentially offer more accurate predictions of power consumption by calculating instantaneous aerodynamic loads on the wing. However, the success of these models inherently depends on the availability and accuracy of experimental kinematic data. The predictive simulation approach offers an alternative strategy, whereby kinematics are neither neglected nor measured experimentally, but calculated as part of the solution procedure. This thesis describes the development of a predictive tool for simulating avian wingbeat kinematics and wakes. The tool is designed in a modular format, in order to be extensible for future research in the biomechanics community. The primary simulation module is an inverse dynamic avian wing model that predicts aerodynamic forces and mechanical power consumption for given wing kinematics. The model is constructed from previous experimental studies of avian wing biomechanics. Wing motion is defined through joint kinematic time histories, and aerodynamic forces are predicted using blade element momentum theory. Mechanical power consumption at the shoulder joint is derived from both aerodynamic and inertial torque components associated with the shoulder joint rotation rate. An optimisation module is developed to determine wing kinematics that generate aerodynamic loads for propulsion and weight support in given flight conditions, while minimising mechanical power consumption. For minimum power cruise, optimisation reveals numerous local minima solutions that exhibit large variations in wing kinematics. Validation of the model against wind tunnel data shows that optimised solutions capture qualitative trends in wing kinematics with varying cruise speed. Sensitivity analyses show that the model outputs are most affected by the defined maximum lift coefficient and wing length, whereby perturbations in these parameters lead to significant changes in the predicted amount of upstroke wing retraction. Optimised solutions for allometrically scaled bird models show only small differences in predicted advance ratio, which is consistent with field study observations. Accelerating and climbing flight solutions also show similar qualitative trends in wing kinematics to experimental measurements, including a reduction in stroke plane inclination for increasing acceleration or climb angle. The model predicts that both climb angle and climb speed should be greater for birds with more available instantaneous mechanical power. Simulations of the wake using a discrete vortex model capture fundamental features of the wake geometry that have been observed experimentally. Reconstruction of the velocity field shows that this method overpredicts induced velocity in retracting-wing wakes, and should therefore only be applied to extended-wing phases of an avian wingbeat.
Supervisor: Crowther, William Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.553489  DOI: Not available
Keywords: Avian ; Predictive simulation ; Flapping ; Wake ; Bird flight ; Inverse dynamics
Share: