Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.547051
Title: Microwave transmissivity of sub-wavelength metallic structures
Author: Edmunds, James David
Awarding Body: University of Exeter
Current Institution: University of Exeter
Date of Award: 2011
Availability of Full Text:
Access through EThOS:
Access through Institution:
Abstract:
The use of patterned metallic surfaces for the control of the transmission of microwave radiation has been reinvigorated in recent years due to the success and interest in metamaterial research. These metallic periodic structures, commonly referred to as frequency selective screens (FSSs), allow responses to be tailored according to the geometry of the metallic structure as opposed to the material composition. A consequence of the presence of a metallic corrugation is the possible excitation of surfaces waves (commonly referred to as surface plasmon polaritons at visible frequencies). Surface waves can be utilised to achieve further control of the transmission properties of a structure. In this thesis several highly original metallic structures are investigated which use FSS and surface wave concepts. These structures exhibit interesting and previously unexplained transmission behaviour. The experimental chapters within this thesis are divided into two areas. The first three experimental chapters (4-6) present original investigations into the excitation of diffractively coupled surface waves on metallic hole/patch arrays and their role in the enhanced transmission/reflection of microwave radiation. The importance of metallic connectivity within arrays is highlighted through measurements of the metallic filling fraction dependence on the transmission properties of regular periodic and random arrays. The last two experimental chapters (7-8) contain investigations into the transmission properties of two novel resonant cavities. The structure studied in chapter 7 provides a mechanism for remarkably enhanced microwave transmission on resonance through an otherwise opaque continuous thin metal film. The second resonant cavity structure in chapter 8 uses a resonant array of metallic crosses to form a ‘resonant mirror’ Fabry-Perot cavity. These resonant FSSs exhibit a frequency dependent transmission/reflection and phase response thus producing an interesting series of modes which have very different properties to those supported by a non-resonant mirror etalon.
Supervisor: Sambles, J. Roy ; Hibbins, Alastair P. ; Youngs, Ian J. Sponsor: EPSRC ; Dstl
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.547051  DOI: Not available
Keywords: microwave ; transmission ; metallic ; structure ; surface waves ; diffraction
Share: