Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.546065
Title: Additive manufacturing of non plastic porcelain material by direct writing and freeze casting
Author: Peña del Olmo, Magali Noemi
Awarding Body: De Montfort University
Current Institution: De Montfort University
Date of Award: 2011
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
Two direct consolidation methods usually used for advanced ceramics have been combined in this project in order to develop a novel fabrication route for traditional ceramics. Specifically the method used is based on the Additive Manufacturing extrusion process using direct writing of high solid loading ceramic pastes and then freeze-casting to solidify the deposited material. This novel fabrication method, for which a patent has been granted, has been christened “Direct Writing Freeze-Casting” (DWFC). Although the DWFC process is the subject of investigation by other researchers for a range of different applications, including the production of medical implants with alumina, the research presented in this thesis focuses on its use in the manufacture of white wares, giftware, and applied arts and crafts in general. This new system will provide designers, potters, artists, craft makers and manufacturers with a flexible and automated way of manufacturing porcelain objects. One of the major challenges to be overcome to exploit the DWFC process is the development of suitable slurry material formulations. Initial trials demonstrated that it is not possible to use conventional clay based porcelain materials with a platelet shaped microstructure which inhibits freeze casting. In this thesis the development and characterisation of non plastic porcelain slurry, based on substitution of kaolin (clay) with a calcined clay material (molochite), which can be processed using this new method is presented. The new non plastic porcelain formulation, which has a high solid load of 75.47% wt., has been subjected to detailed analysis to assess its suitability at each stage of the process; extrusion, freeze-casting (solidification) and firing.
Supervisor: Not available Sponsor: National Consul of Sciences and Technology Mexico, CONACYT
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.546065  DOI: Not available
Keywords: freeze casting ; direct writing ; additive manufacturing.
Share: