Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.541795
Title: Syngas production from heavy liquid fuel reforming in inert porous media
Author: Pastore, Andrea
Awarding Body: University of Cambridge
Current Institution: University of Cambridge
Date of Award: 2010
Availability of Full Text:
Access from EThOS:
Full text unavailable from EThOS. Please try the link below.
Access from Institution:
Abstract:
In the effort to introduce fuel cell technology in the field of decentralized and mobile power generators, a hydrocarbon reformer to syngas seems to be the way for the market uptake. In this thesis, a potential technology is developed and investigated, in order to convert commercial liquid fuel (diesel, kerosene and biodiesel) to syngas. The fundamental concept is to oxidise the fuel in a oxygen depleted environment, obtaining hydrogen and carbon monoxide as main products of the reaction. In order to extend the flammability limit of hydrocarbon/air mixtures, the rich combustion experiments have been carried out in a two-layer porous medium combustor, which stabilises a flame at the matrix interface and recirculates the enthalpy of the hot products in order to enhance the reaction rates at ultra-rich equivalence ratio. This thesis demonstrates the feasibility of the concept, by exploring characteristic parameters for a compact, reliable and cost effective device. Specifically, a range of equivalence ratios, thermal loads and porous materials have been examined. n-heptane was successfully reformed up to an equivalence ratio of 3, reaching a conversion efficiency (based on the lower heating value of H2 and CO over the fuel input) up to 75% for a packed bed of alumina beads. Thermal loads from P=2 to 12 kW at phi=2.0 demonstrated that heat losses can be reduced to 10%.Similarly, diesel, kerosene and bio-diesel were reformed to syngas in a Zirconia foam burner with conversion efficiency over 60%. The effect of different burners, thermal loads and equivalence ratios have also been assessed for these commercial fuels, leading to equivalent conclusions. A preliminary attempt to reduce the content of CO and hydrocarbons in the reformate has been also performed using commercial steam reforming and water-gas shift reaction catalysts, obtaining encouraging results. Finally, soot emission has been assessed, demonstrating particle formation for all the fuels above phi=2.0, with biodiesel showingthe lowest soot formation tendency among all the fuels tested.
Supervisor: Not available Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.541795  DOI: Not available
Keywords: Syngas production ; Rich combustion ; Porous burner ; Superadiabatic combustion ; Fuel reforming
Share: