Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.527375
Title: Modelling and control of a robotic manipulator subject to base disturbances
Author: Wronka, Cyprian M.
Awarding Body: Heriot-Watt University
Current Institution: Heriot-Watt University
Date of Award: 2010
Availability of Full Text:
Access from EThOS:
Access from Institution:
Abstract:
This thesis presents the modelling and control of a high gear ratio robotic manipulator mounted on a heavier moving base which is subject to base disturbances. The manipulator motion is assumed not to affect the base motion. The problem of a robotic manipulator on a non-inertial base can be applied to operation on sea vessels or all-terrain vehicles, where the base motion is unknown and cannot be used as a feed-forward signal to the model. A dynamic model is derived for the PA10-6CE manipulator with the assumption of a fixed base and the model terms are analysed numerically when comparing the simulation and experimental results. Based on the obtained results a set of model based controllers is compared to a basic proportional and derivative type controller to evaluate the trajectory tracking gains and trade-offs. The dynamic model is extended to the case of a manipulator on a moving base and numerical comparisons of simulation and experimental results are used to verify the model validity and the significance of the various model terms. From the results of this study a set of model based controllers is obtained. A novel adaptive scheme is then proposed for compensation of an unknown and varying gravity acceleration vector acting on the manipulator base. Controllers based on using an additional sensor output are compared with static and adaptive gravity controllers and the latter proved to be superior in terms of trajectory tracking performance.
Supervisor: Dunnigan, Matthew Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.527375  DOI: Not available
Share: