Use this URL to cite or link to this record in EThOS: http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.490973
Title: Adjoint error estimation for elastohydrodynamic lubrication
Author: Hart, Daniel Edward
Awarding Body: University of Leeds
Current Institution: University of Leeds
Date of Award: 2008
Availability of Full Text:
Access through EThOS:
Access through Institution:
Abstract:
In this thesis, adjoint error estimation techniques are applied to complex elastohydrodynamic lubrication (EHL) problems. A functional is introduced, namely the friction, and justification is provided as to why this quantity, and hence its accuracy, is important. An iterative approach has been taken to develop understanding of the mechanisms at work. A series of successively complex cases are proposed, each with adjoint error estimation techniques applied to them. The first step is built up from a model free boundary problem, where the cavitation condition is captured correctly using a sliding mesh. The next problem tackled is a hydrodynamic problem, where non-linear viscosity and density are introduced. Finally, a full EHL line contact problem is introduced, where the surface deforms elastically under pressure. For each case presented, an estimate of a finer mesh friction, calculated from solutions obtained only on a coarse mesh, is corrected according to the adjoint error estimation technique. At each stage, care is taken to ensure that the error estimate is computed accurately when compared against the measured error in the friction. Non-uniform meshes are introduced for the model free boundary problem. These nonuniform meshes are shown to give the same excellent predictions of the error as uniform meshes. Adaptive refinement is undertaken, with the mesh being refined using the adjoint error estimate. Results for this are presented for both the model free-boundary problem and the full EHL problem. This is shown to enable the accurate calculation of friction values using an order of magnitude fewer mesh points than with a uniform mesh. Throughout this thesis, standard numerical techniques for calculating EHL solutions have been used. That is, regular mesh finite difference approximations have been used to discretise the problem, with multigrid used to efficiently solve the equations, and spatial adaptivity added through multigrid patches. The adjoint problems have been solved using standard linear algebra packages.
Supervisor: Berzins, M. ; Jimack, P. K. ; Goodyer, C. E. Sponsor: Not available
Qualification Name: Thesis (Ph.D.) Qualification Level: Doctoral
EThOS ID: uk.bl.ethos.490973  DOI: Not available
Share: